Giá: Yêu cầu báo giá
Hàng có sẵn: Model: USB-T RCG Xuất sứ: USA Chi tiết sản phẩm: 
▪ -20 to +60°C (-4 to +140°F) measurement range
▪ Stores over 32,000 readings
▪ Control software available as a free download
▪ Stainless steel (316 grade) case
▪ Rechargeable Lithium-Ion battery
▪ Logging rates between 1 second and 12 hours
▪ Immediate and delayed logging start
▪ User-programmable alarm thresholds
▪ Red & green status LEDs behind protective glass window
▪ Environmental protection to IP67
▪ Supplied with Type A-Mini B USB cable
This standalone data logger measures and stores more than 32,000 temperature readings over a -20 to +60°C (-4 to +140°F) range with a resolution of 0.1°C (0.2°F).
The polycarbonate window and stainless steel 316 assembly provides protection from corrosion, impact and water ingress to IP67/NEMA 4X.
The user can easily set up the logger and view downloaded data by connecting the data logger to a PC’s USB port and using the free PC software. Data can then be graphed, printed and exported to other applications for detailed analysis.
The data logger is powered by a Lithium-Ion battery which can typically allow for logging for up to 1 month.
SPECIFICATIONS
|
Measurement range
|
-20 to +60°C (-4 to +140°F)
|
|
Internal resolution
|
0.1°C (0.2°F)
|
|
Accuracy (overall error)
|
±1°C (±2°F)
|
|
Logging rate
|
User selectable between 1 second & 12 hours
|
|
Operating temperature range
|
-20 to +60°C (-4 to +140°F)
|
|
Battery Life
|
4 weeks (at 20°C and 1 minute logging rate)
|
|
Recharging time
|
5 hours
|
|
Charging temperature range
|
+10 to +30°C (+50 to +86°F)
|
|
Readings
|
32,510
|
|
Dimensions
|
93 x 20mm
|
LED STATUS INDICATION
USB-T RCG features two LEDs:
▪ The first LED flashes red to indicate that the USB-T RCG is in an alarm condition. It will flash when the logged temperature has
exceeded a Low or High alarm level.
▪ The second LED flashes green to indicate that the USB-T RCG is not in an alarm condition.
Using the free PC control software it is possible to set the alarm to remain active even if the reading has returned to normal, in
which case the alarm LED will continue to flash red. This ‘Hold’ feature in the software ensures the user is notified that at some
point an alarm level has been exceeded, without needing to download the data.
Hold is enabled by default, and can be turned off via the control software. The red LED will then only flash whilst the logger is in an
alarm condition. When the temperature returns to normal, the green LED will flash.
